PRODUCT DESCRIPTION
AMSOIL Formula 4-Stroke® PowerSports Synthetic Motor Oil
(AFF) is specially formulated for ATVs, UTVs, snowmobiles and
other power sports applications. Its broad viscosity range and
wax-free formulation make it excellent for use in both hot and
cold temperature extremes. As an SAE 40 weight motor oil, AMSOIL
AFF provides outstanding protection for hot operating engines,
while its 0W rating and -60°F pour point ensure easy
cranking, excellent cold weather starting and quick post-startup
protection. Formula 4-Stroke® Power Sports is an extreme
temperature lubricant that provides outstanding performance in
high performance, recreational or work/utility engines.
Resists Heat and Thermal
Breakdown
AMSOIL engineered Formula 4-Stroke® PowerSports Synthetic
Motor Oil to withstand the high temperatures of recreational
engines. It effectively resists oxidation and oil vaporization to
prevent carbon/varnish formation, control oil consumption and
minimize exhaust emissions. AMSOIL AFF controls oil thickening
for good fuel economy, and it keeps engines clean for peak
operating efficiency.
Excellent For
Transmissions
AMSOIL Formula 4-Stroke® PowerSports Oil is wet clutch
compatible and contains no friction modifiers, making it ideal
for both two- and four-stroke ATV transmissions. The friction
modifier-free formulation is designed to prevent clutch slippage,
delivering maximum torque and power to the wheels – a
critical feature for towing or high-horsepower engines. AMSOIL
AFF meets the frictional requirements of JASO MA/MA2.
Superior Wear Protection
AMSOIL AFF is formulated with high levels of anti-wear additives
that provide excellent protection for pistons, bearings and gears
in transmission containing units, while its shear stable, SAE 40
viscosity delivers a thick lubricating film for an extra margin
of protection in hard working engines.
Anti-Foam
Churning occurs in high RPM engines that can cause oil to foam,
depleting its lubricating abilities and increasing heat and wear.
AMSOIL AFF controls foam, promoting cooler engine operation and
reduced wear.
Special Additives
AMSOIL Formula 4-Stroke® PowerSports Synthetic Motor Oil
contains robust dispersant/detergent additives that effectively
neutralize the high levels of acids and combustion by-products
prone to small engines. And it is anti-rust fortified for
superior rust prevention, which is especially important in
seasonally or infrequently used power sports equipment.
Applications and Recommendations
AMSOIL Formula 4-Stroke® PowerSports Synthetic Motor Oil is
recommended for four-stroke engines and transmissions on two- or
four-stroke powered applications. It is an all climate/all season
oil that replaces 0W-30, 0W-40, 5W-30, 10W-30 and 10W-40 oils for
ATVs, UTVs, snowmobiles and other power sports equipment.
Manufacturers include Polaris®, Honda®, Yamaha®,
Ski-Doo®, Can-Am® (Bombardier®), Suzuki®,
Kawasaki® and Arctic Cat®.
• API SL/CF, SJ, SH, SG
• JASO MA/MA2
• ISO-L-EMA2
Compatibility
AMSOIL Formula 4-Stroke® PowerSports is compatible with
conventional and synthetic motor oils. Mixing AMSOIL motor oils
with other oils, however, will shorten the oil life expectancy
and reduce the performance benefits. AMSOIL does not support
extended drain intervals where oils have been mixed. Aftermarket
oil additives are not recommended for use with AMSOIL motor
oils.
Service Life
Follow the equipment manufacturer’s recommended drain
intervals.
Health & Safety
This product is not expected to cause health concerns when used
for the intended application and according to the recommendations
in the Material Safety Data Sheet (MSDS). An MSDS is available
upon request at 715-392-7101 or on the
AMSOIL Website. Keep Out of Reach of Children. Don’t
pollute. Return used oil to collection centers.
TYPICAL TECHNICAL PROPERTIES
|
AMSOIL FORMULA
4-STROKE® POWER SPORTS SYNTHETIC MOTOR OIL SAE
0W-40 (AFF)
|
Kinematic Viscosity @
100°C, cSt (ASTM D-445)
|
14.7
|
Kinematic Viscosity @
40°C, cSt (ASTM D-445)
|
83.7 |
Viscosity Index (ASTM
D-2270)
|
184 |
CCS Viscosity, cP @
(-35°C) (ASTM D-5293)
|
6139 |
Flash Point °C (°F)
(ASTM D-92)
|
226
(439) |
Pour Point °C (°F)
(ASTM D-97)
|
-51
(-60) |
Noack Volatility, % weight
loss (g/100g) (ASTM D-5800)
|
7.3% |
Four Ball Wear Test
(ASTM D-4172B: 40 kg, 75°C, 1200 rpm, 1 hour), Scar,
mm
|
0.35 |
Total Base
Number
|
10.5 |