AMSOIL INTERCEPTOR™ Synthetic 2-Cycle Oil
is formulated with a proprietary blend of the finest synthetic
base oils and additives available today. This unique AMSOIL
Chemistry represents a breakthrough development in the field of
two-cycle engine lubrication. The backbone of AMSOIL INTERCEPTOR
2-Cycle Oil is a specially developed molecularly saturated
synthetic base oil. This, combined with a robust additive
package, ensures exceptional lubricity, cleanliness and optimum
clean-burning characteristics. Extensive research and testing,
including a full snowmobiling season in severe Rock Mountain
applications, has proven that wear on cylinders, pistons and
bearings is significantly reduced. And with up to 30 percent more
detergency and dispersancy additives than typical two-cycle oils,
AMSOIL INTERCEPTOR virtually eliminates hard carbon deposits that
cause exhaust power valve sticking, ring sticking and
pre-detonation promoting "hot spots" in the combustion
chamber.
- Helps prevents hard carbon deposits
that cause exhaust power valve sticking and ring
sticking.
- Superior lubricity controls cylinder,
piston and bearing wear.
- Reduces smoke and odor associated
with two-cycle engines.
- Helps prevent plug
fouling.
- Provides exceptional SAE #4 cold
temperature fluidity (-58°F pour point).
- Versatile and excellent for all types
of recreational equipment.
- Protects against
rust.
- Helps prevent pre-detonation from
combustion chamber "hot spots."
See Article: Two-Cycle Engine Applications and Lubrication
Needs
PRODUCT DESCRIPTION
AMSOIL INTERCEPTOR Synthetic 2-Cycle Oil is
formulated with a proprietary blend of the finest synthetic base
oils and additives available today. This unique AMSOIL chemistry
represents a breakthrough development in the field of two-cycle
engine lubrication.
The backbone of AMSOIL INTERCEPTOR 2-Cycle Oil
is a specially developed molecularly saturated synthetic base
oil. This, combined with a potent additive package, ensures
exceptional lubricity, cleanliness and optimum clean-burning
characteristics. Extensive research and testing, including a full
snowmobiling season in severe Rocky Mountain applications, has
proven that wear on cylinders, pistons and bearings is
dramatically reduced. And with up to 30 percent more detergency
and dispersancy than typical two-cycle oils, AMSOIL INTERCEPTOR
virtually eliminates damaging deposits on piston skirts, ring
grooves and exhaust power valves.
APPLICATIONS (2-Cycle Recommendations
Chart)
AMSOIL INTERCEPTOR Synthetic 2-Cycle Oil is recommended as an
injector oil or at a 50:1 mix ratio in carbureted, electronic
fuel Injected (EFI) and direct fuel injected (DFI) snowmobiles,
personal watercraft, motorcycles, ATVs and jet boats, including,
but not limited to, those manufactured by Bombardier®,
Yamaha®, Arctic Cat®, Polaris®, Kawasaki®,
Suzuki® and Honda®.
It is recommended wherever JASO FC or API TC
two-cycle oils are specified. INTERCEPTOR is a premium quality
replacement for recreational equipment manufacturers' branded
two-cycle oils. It is compatible with most mineral and synthetic
two-cycle oils, however, for best performance, mixing oils should
be minimized.
400,000 Miles of Severe Snowmobile Field
testing With No Deposit Buildup, Power Valve Sticking, Ring
Sticking or Engine Failures. Subjected to adverse field testing
conditions in the Rocky Mountains, including long trail rides,
high RPM powder riding and steep hill climbs, AMSOIL INTERCEPTOR
demonstrated superior wear protection and outstanding deposit
control.
|
No carbon deposits are
detectable in the functioning region of the exhaust power valves,
resulting in "no stick" performance, continuous valve
operation and reduced maintenance. |
|
|
Pistons show no scoring, little or no
wear and no heavy deposits, and wrist pins show no discoloration
from heat. In fact, the original machine markings on the pistons
are still visible. |
Cylinder head is clean with no deposits,
preventing pre-ignition problems. |
TYPICAL TECHNICAL
PROPERTIES
INTERCEPTOR™ Synthetic 2-Cycle Oil
|
Kinematic Viscosity @ 100°C, cSt (ASTM
D-445)
|
8.5 |
Kinematic Viscosity @ 40°C, cSt (ASTM
D-445)
|
45.1 |
Viscosity Index (ASTM D-2270)
|
170 |
Pour Point °C (°F) (ASTM D 97)
|
-50 (-58) |
Flash Point °C (°F) (ASTM D 92)
|
86 (187) |
Fire Point °C (°F) (ASTM D 92)
|
86 (187) |
ASTM Brookfield Viscosity @ -40°C
(°F)
|
12100 cP |
SAE Fluidity/Miscibility
|
#4 |
DANGER: harmful or fatal if swallowed.
Contains synthetic lubricant and petroleum distillates. If
swallowed do not induce vomiting. Contact a physician
immediately. Keep away from fire, heat and open flame. Use with
adequate ventilation. Avoid frequent or prolonged skin contact.
Flush eyes with water for 15 minutes in case of contact.
KEEP OUT OF REACH OF
CHILDREN.
|