World's Best Synthetics


World's Best Synthetics

T- 1 CERTIFIED


World's Best Synthetics
AUTHORIZED DEALER
West Lafayette, IN
765-409-9023
AMSOIL Synthetic Stationary Natural Gas Engine Oil
OPPORTUNITIES


AMSOIL My Garage
INFORMATION


GALLERIES/MEDIA

OTHER LINKS


FOLLOW WBS

Sign Up For The World's Best Monthly News Letter!

* required

*



Email Marketing by VerticalResponse


Worlds Best Amssoil Blog   YouTube

facebook   Twitter

Linkedin   As Featured On EzineArticles
AMSOIL Synthetic Stationary Natural Gas Engine Oil

AMSOIL Synthetic Stationary Natural Gas Engine Oil (ANGS)

Formulated to Provide Top Efficiency in Stationary Engines Fueled by Natural Gas

BUY NOW DATA SHEET

Package sizes include:

5-Gallon Pail
55-Gallon Drum
275-Gallon Tote

PRODUCT DESCRIPTION
AMSOIL Synthetic Stationary Natural Gas Engine Oil(ANGS) delivers continuous protection in stationary natural gas engines calling for an SAE 40, low-ash lubricant. Its shear-stable formula qualifies it as a multi-grade 20W-40 so it can be used over a broad ambient temperature range, eliminating the need for seasonal oil changes.

CONTROLS WEAR
AMSOIL Synthetic Stationary Natural Gas Engine Oil is formulated with low sulfated ash to minimize carbon deposits and port blockage, resulting in reduced maintenance and extended equipment life. Advanced anti-wear and anti-scuff protection helps control valve recession and wear on piston rings, cylinder liners and bearings during continuous severe-service operation in stationary natural gas engines.

KEEPS ENGINES CLEAN
AMSOIL Synthetic Stationary Natural Gas Engine Oil is engineered with premium base oils and additives to improve engine lubrication by keeping oil passages clean. Its balanced formula allows for a high total base number (TBN) to protect against corrosion while meeting low ash requirements.

CONTROLS NITRATION
Nitration is a common concern in natural gas engines and can cause oil to thicken, reducing operational efficiency. AMSOIL Synthetic Stationary Natural Gas Engine Oil is naturally resistant to nitration, delivering maximum protection in natural gas engines.

PROTECTS EMISSIONS SYSTEM
AMSOIL Synthetic Stationary Natural Gas Engine Oil is formulated with low zinc and phosphorus levels to prolong the life of emission catalyst systems without sacrificing wear protection.

DELIVERS CONTINUOUS PROTECTION
AMSOIL Stationary Natural Gas Engine Oil may be used for extended drain intervals when monitored by an oil analysis program. If extending oil drain intervals, change the oil filter at the engine manufacturer's recommended interval.

APPLICATIONS
AMSOIL Synthetic Stationary Natural Gas Engine Oil is recommended for use in stationary four-stroke and select two-stroke engines that require low-ash (<.50%) engine oil and are fueled by natural gas, including those from the following manufacturers:

• Bergen
• Caterpillar
• Cooper-Bessemer (two-stroke)
• Dresser-Rand (Clark) (two-stroke)
• Dresser-Rand (Worthington) (two-stroke)
• Dresser-Rand
• Jenbacher
• MAN B&W
• MDE
• MAN Brons
• Mirrlees Blackstone
• MWM Deutz
• Niigata
• Ruston
• Wärtsilä NSD
• SEMT Pielstick
• SEMT Pielstick
• Superior Waukesha

AMSOIL Synthetic Natural Gas Engine Oil should not be used in automotive engines or vehicular engines that run on propane or natural gas.

MIXING AMSOIL
AMSOIL Synthetic Natural Gas Engine Oil is compatible with conventional petroleum oils and other synthetic lubricants; however, mixing AMSOIL Natural Gas Engine Oil with a petroleum oil will reduce the drain interval of the AMSOIL Natural Gas Engine Oil. Engine oil additives or after-market products are not recommended for use with AMSOIL Natural Gas Engine Oil.

TYPICAL TECHNICAL PROPERTIES

AMSOIL Synthetic Stationary Natural Gas Engine Oil(ANGS)

Ash Content (ASTM D-874)
0.46%
Kinematic Viscosity @ 100°C, cSt (ASTM D-445)
14.3
Kinematic Viscosity @ 40°C, cSt (ASTM D-45)
101.0
Viscosity Index (ASTM D-2270)
146
Noack Volatility, % weight loss (g/100g) (ASTM D 5800)
4.4
Flash Point °C (°F) (ASTM D 92)
252 (486)
Fire Point °C (°F) (ASTM D 92)
272 (522)
Pour Point °C (°F) (ASTM D 97) -36 (-33)
Four Ball Wear Test (40 kgf, 75°C, 1200 rpm, 1hr,) Scar in mm (ASTM D-4172B)
0.35
High-Temperature/High-Shear Viscosity @ 150°C
1.4 X 106 S-1, cP (ASTM D-5481)
4.6
TBN
5.6
PRODUCT LOOKUP
Auto Lookup
 
Motorcycle Lookup

FILTER LOOKUP


APPLICATIONS


APPLICATION GUIDES


CROSS REFERENCE


INSTALLATION INFO


COMPARATIVE TESTING


WARRANTY & SAFETY


     
 
BUY WHOLESALE TODAY!!!

Become a Preferred Customer

Become an AMSOIL Dealer

Become an AMSOIL Dealer or Preferred Customer and receive up to 25% off retail pricing. You can get started today for as little as $10!


Amsoil Racing

 

   
AM TAB

Mann
   DonaldsoninjenWix  NGK   Mothers  tri    analyze   altrum    aggr 

Home     Amsoil Racing     Warranty     Privacy Policy    FAQ     Satisfied  Customers     Oil Analysis     Contact Us     Site Map 

Copyright 2008-2010 World's Best Synthetics. All Rights Reserved.