|
PRODUCT DESCRIPTION
AMSOIL Biodegradable Hydraulic Oil (BHO) is a premium performance hydraulic oil designed to biodegrade when subjected to sunlight, water and microbial activity. Manufactured with a high quality blend of oleic vegetable oils and customized synthetic esters, it meets the U.S. Federal bio-based procurement guidelines as defi ned in Section 9002 of the Farm Security and Rural Investment Act of 2002 (FSRIA).
AMSOIL Biodegradable Hydraulic Oil exhibits high biodegradability and low aquatic toxicity, along with superior oxidative stability, low temperature performance and outstanding results in laboratory and extended duration pump testing. It contains anti-oxidants that ensure long oil life and foam inhibitors that promote problem-free operation. It is hydrolytically stable and ideal for use where water contamination is a problem.
Carefully designed additives help prevent pump wear and protect critical components from rust. AMSOIL Biodegradable Hydraulic Oil meets the stringent Vickers M-2950-S and I-286-S hydraulic oil specifications.
APPLICATION
RECOMMENDATION
AMSOIL Biodegradable Hydraulic Oil is recommended for stationary and mobile applications using gear, vane and piston hydraulic systems operating under high pressure and temperatures up to 180°F. It should also be used where high biodegradability and low aquatic toxicity are desired. Typical applications include construction, logging and farming equipment, lawn and turf care or anywhere leaking, spills or ruptured hydraulic lines may present an environmental hazard.
AMSOIL Biodegradable Hydraulic Oil is compatible with most synthetic and petroleum based hydraulic oils. However, to ensure proper performance, it is recommended systems be drained and fl ushed prior to installing AMSOIL BHO.
PERFORMANCE FEATURES
- Vickers M-2950-S, I-286-S
- 95% Biodegradable (CEC L-33-T-93)
- Low Aquatic Toxicity
- Thermally and Hydrolytically Stable
- Resists Oxidation
- Outstanding Wear Protection
- Anti-Rust and Anti-Foam Protection
AMSOIL PRODUCT WARRANTY
AMSOIL Industrial Lubricants are formulated to exceed accepted
industry specifications. AMSOIL warrants that the use of its
lubricants will not cause mechanical damage to any
mechanically-sound equipment when AMSOIL products are used in
full compliance with the company’s recommendations.
However, the purchaser is responsible for determining if these
specifications are adequate and proper for the intended
application. The AMSOIL warranty is limited to lubricant
performance consistent with indicated specifications. No
additional warranty, expressed or implied, can be made. For
additional warranty information see the AMSOIL
Lubricant Waranty.
AMSOIL PRODUCT AVAILABILITY
AMSOIL products are available in 5-gallon pails, 55-gallon drums, 275-gallon totes and bulk quantities. AMSOIL Industrial Lubricants are stocked in Superior, Wisconsin and in select regional distribution centers throughout the United States and Canada. AMSOIL will stock additional quantities of lubricants or special-order products based on customer requests and regional demands. For applications and recommendations, contact your local AMSOIL Dealer or the AMSOIL Technical Services Department.
|
Typical Technical
Properties
|
| AMSOIL Biodegradable Hydraulic Oil - ISO 46 (BHO) |
| ISO VG - ASTM D-2422 |
46 |
| Viscometrics 100°C, cSt - ASTM
D-445 |
9.6 |
| Viscometrics 40°C, cSt - ASTM
D-445 |
44.9 |
| Viscosity Index (VI) - ASTM
D-2270 |
200 |
| Specific Gravity |
0.938 |
| Density |
7.81 |
| Four-Ball Wear Test - ASTM D-4172 (40
kg, 1200 rpm, 75° C, 60 min.) |
0.36 |
| FZG Failure Load Stage — ASTM D-5182 |
12 |
| Flash Point °C (°F) - ASTM
D-92 |
232°C
(450°F) |
| Pour Point °C (°F) - ASTM
D-97 |
-32°C
(-27°F) |
| Copper Strip Corrosion Test - ASTM
D-130 |
1A |
Rust Procedure ASTM D-665
A – distilled water
B – salt water
|
PASS
PASS |
Foam - ASTM D-892
Sequence
I
Sequence
II
Sequence
III
|
0/0
10/0
0/0 |
| Demulsibility - ASTM D1401
Oil/Water/Cuff (minutes) |
40/40/0
(10) |
| Modified Sturm, OECD 301B |
Readily Biodegradable (Pw1) |
| Biodegradability % — CEC L-33-T-93 |
95% |
| Fathead minnow, 96h, LC50, ppm |
>10000ppm |
| Daphnia magna, 48h, EC50, ppm |
>10000WAF |
| Cleanliness ISO 4406 |
17/15/12 |
| (FSRIA) Criteria |
PASS |
|
